Threaded Terminal Studs

Sanlo threaded terminals are a unique way to essentially attach a bolt to the end of the cable.  These can be used to mount an assembly through a mating part and/or to allow you to tension the cable assembly after installation.  All of our threaded terminals are designed so that the full breaking strength of the cable is achieved when properly installed.  These terminals will most often be pressed with a “hex” die so that you have wrench flats to help with installation.
Download PDF

Compression Sleeves (Dimensions in Inches)
For Cable Dia. Thread A B C Material
1/16″ 10-32 1.060 1.750 0.187 Zinc-Plated Steel
M5-0.8 0.500 1.000 0.190 Zinc-Plated Steel
3/32″ 1/4-20 1.500 2.500 0.250 Zinc-Plated Steel
1/4-20 1.250 2.060 0.250 Stainless Steel
M6-1.0 1.380 2.190 0.250 Zinc-Plated Steel
1/8″ 1/4-20 1.750 3.250 0.250 Zinc-Plated Steel
1/4-20 1.500 2.500 0.250 Zinc-Plated Steel
1/4-20 1.500 2.500 0.250 Stainless Steel
M6-1.0 1.380 2.190 0.250 Zinc-Plated Steel
M6-1.0 1.380 2.190 0.250 Stainless Steel
1/4-28 1.375 2.190 0.250 Zinc-Plated Steel
5/16-18 2.000 3.120 0.312 Stainless Steel
3/16″ M10-1.5 1.560 3.460 0.500 Zinc-Plated Steel
3/8-16 5.000 6.250 0.375 Stainless Steel
5/16-18 2.000 3.625 0.375 Zinc-Plated Steel
5/16-18 2.000 3.125 0.375 Zinc-Plated Steel
1/4″ 1/2-20 2.000 3.380 0.500 Zinc-Plated Steel
5/16″ 5/8-11 2.120 4.500 0.625 Zinc-Plated Steel